How does UV-c crop protection work?

How does UV-c crop protection work?

CleanLight Direct offers CleanLight UV-C technology for residue-free crop protection. CleanLight uses ultraviolet light at a wavelength of 254 nm to disrupt the DNA of microorganisms on plant surfaces, helping interrupt their ability to reproduce. This germicidal wavelength has been used for decades in water and air disinfection.

The treatment dose matters. CleanLight combines lamp output, a parabolic reflector and the correct working distance to deliver targeted UV-C exposure. Used as directed, brief, regular passes help control surface pathogens without damaging healthy plant tissue. Excessive exposure can stress or bleach leaves, so always follow your unit’s manual.

Not every UV-C lamp operating at 254 nm is suitable for crop protection. Use equipment designed for this application, and follow its instructions for distance, exposure and protective equipment.

What is the effect of UV-C light on a fungus?

UV-C damages fungal spores and exposed fungal growth, including mycelium and hyphae, helping interrupt the infection cycle. CleanLight can be used preventatively and to control powdery mildew on plant surfaces. For botrytis and other pathogens, surface treatment helps reduce spread, but it cannot cure rot that has already grown inside plant tissue or repair damaged leaves.

Consistent coverage and repetition are important because UV-C only treats the surfaces its light reaches. In line with our current UV-technology guidance, use a daily treatment routine. During an active outbreak, the guidance recommends twice-daily treatment until symptoms subside, then a return to daily prevention. Follow the exposure and distance instructions for your specific CleanLight unit, and maintain good airflow, humidity control and sanitation.

UV-C and natural sunlight

Ultraviolet light is part of the sun’s spectrum, but UV-C is filtered out by the atmosphere rather than reaching crops at the earth’s surface. CleanLight treatment is therefore a controlled application of germicidal UV-C, not a replacement for UV-C that plants would normally receive from sunlight.

Greenhouses and indoor grow rooms need a dedicated UV-C source for this type of treatment. A calibrated lamp and reflector allow growers to target exposed plant surfaces as part of a regular crop-care routine.

CleanLight UV-C crop protection

CleanLight has developed its agricultural UV-C technology in the Netherlands since 2006. Its approach combines controlled exposure with a reflector that directs light toward the crop. Moving the treatment unit across the canopy helps deliver coverage, but dense foliage and shaded surfaces still require attention.

CleanLight handheld units bring this approach to smaller growing spaces. The CleanLight Pro and CleanLight Hobby have different outputs, so treatment time must match the unit rather than follow a single timing rule. CleanLight Direct’s current technology guide explains the differences and the role of enclosed UV-C air treatment in reducing airborne spore pressure.

UV-C can harm skin and eyes. Keep yourself and others out of the beam, wear the specified protective equipment, and follow the safety instructions supplied with your unit.

More information from CleanLight Direct

Explore the mechanism, treatment routine and research overview in What is CleanLight’s UV technology?

Find answers about application, maintenance and safety in our CleanLight frequently asked questions.

Explore CleanLight handheld and air-treatment options in our guide to residue-free UV-C protection against powdery mildew and bud rot.

Back to blog